Preparation:
- Mix all the inputs in a container outdoors in the shade.
- Level the soil by removing stones and any other existing plant
debris to avoid holes in the sleeve.
- Construct an arc of 50 centimetres wide x 1 metre long.
- Tie one end of the sleeve with a strip of rubber.
- Add the mix of inputs
- Fit the end of the base of the ½ bottle in a PVC ring, which will
be attached to the other end of the sleeve, and tie it with a
strip of rubber.
- Attach the upper end of the ½ bottle to a hose and go over the
pre-built wooden arch.
- Connect the other end of the hose to a bucket, which will
receive the fluid produced by the bio-digester
Production of biol in cylinders or drums
For a 200 litre cylinder requires the following inputs:
Inputs:
- 50 kg. of fresh cattle manure
- 2 litres of fresh milk
- 4 kg of vegetable ash
- 4 kg. of cane molasses
- 50 litres of water.
Materiales:
- A 200 litre drum with lid
- An inner tube piston pump
- A metre clear plastic hose
- A disposable one-litre bottle
Preparation:
- Fill in the fresh manure into a plastic drum or can
- Add water and mix evenly with the help of a piece of wood.
- Add the ash and the weeds, continue moving the mixture
- Add the diluted milk and stir the mixture.
- Seal the drum hermetically to allow the fermentation process
to be completed.
- Close the container hermetically so that the fermentation
process is carried out.
Soluciones Prácticas (antes ITDG) /Av. Jorge Chávez 275 Miraflores, Lima, Perú
Teléfono: (511) 447-5127/446-7324/444-7055 Fax: (511) 446-6621
Web: www.solucionespracticas.org.pe E-mail: info@solucionespracticas.org.pe